C Type Purlin Roll Forming Machine
Contact HUANUO for Shipping, delivery, and payments information.
Products Category
Tag list
- 产品描述
-
Product Parameters
Weight About 2500kg Volume 5630*1000*1300mm Feed width 68mm Holding width 35*13.5mm Sheet thickness 0.3-0.8mm Exit speed About8-15m/min Drive system Motor drive Transmission type gear drive Row number 12 Motor power 5.5KW Hydraulic power 5.5KW cutting type fly cutting The advantages of the C-shaped purlin roller forming machine
The use of this equipment to produce C-shaped steel brings multiple significant advantages to manufacturers and builders:
1. Extremely high production efficiency and capacity
●Continuous automated production: Once started, the machine can produce continuously, with a production speed of over 10 to 30 meters per minute, which is far beyond the traditional Angle steel welding or sawing processes.
●Ready-to-use: It only takes a few dozen seconds from coil to formed C-shaped steel, which can quickly meet the project schedule requirements.
2. The production cost is extremely low and its economic efficiency is outstanding
●Raw material cost optimization: Using steel coils as raw materials, its cost is lower than that of finished steel sections of the same specification. And the thickness of different parts can be precisely controlled according to mechanical requirements (through variable cross-section design), achieving "making the best use of materials".
●Low labor cost: The entire production line only requires 1-2 people to operate, with a high degree of automation, significantly saving labor.
●Low energy consumption cost: The energy consumption of cold bending forming process is much lower than that of hot rolling process.
3. Outstanding flexibility and customization capabilities
●Multi-functionality in one machine: By replacing the forming rollers of different specifications, the same machine can produce C-shaped steel of various heights, widths and thicknesses.
●Customized production: It is possible to easily produce C-shaped steel of non-standard sizes to meet special design requirements. It can easily achieve fixed-length cutting, automatic punching (connection holes, reinforcing bar holes, etc.) and automatic marking, providing great convenience for subsequent construction.
4. The product quality is stable and of high precision
●Consistency guarantee: Machine forming ensures that the size and shape of each C-shaped steel are highly consistent, avoiding errors caused by manual welding or cutting.
●High strength: The cold-bending forming process causes work hardening in the material, which to a certain extent enhances the strength of the component.
●Good surface quality: Roll forming does not damage the galvanized layer or coating on the material surface like welding does, and has better anti-corrosion performance.
5. High material utilization rate and environmentally friendly
●There is almost no waste of scraps, and the material utilization rate is close to 100%.
●Cold bending forming is a clean production process, free from pollution such as smoke and dust.
Preparation before production
1. Equipment inspection
●Safety inspection: Check whether the screws of all machine components are tightened, whether the transmission system is normal, and whether the emergency stop button is effective.
●Lubrication system: Inspect all lubrication points of bearings, gears, etc., and add an appropriate amount of lubricating oil.
●Roller inspection: Confirm that the installed forming rollers meet the specifications of the target C-shaped steel and check whether the roller surface is clean and undamaged.
2. Raw material preparation
●Confirm whether the material, coating (such as galvanization), thickness and width of the steel coil meet the production requirements.
●Support the steel coil with the material rack to ensure it can rotate smoothly.
3. Equipment Commissioning (Key Step)
●Adjust the roller clearance: According to the precise thickness of the sheet, adjust the clearance between the upper and lower forming rollers step by step. If the gap is too tight, it will damage the sheet material; if it is too loose, the formed material will not be full. This is the first step to ensure product quality.
Set up auxiliary functions:
●Punching unit: If the equipment is equipped with online punching, the correct punching die must be installed and the hole spacing should be set properly in the control system.
●Fixed-length cutting: Input the length and quantity of C-shaped steel to be produced in the control computer.
Product Layout Diagram
About Us
● 20+ years of professional roll forming machine manufacturing
● Exported to 100+ countries with global service network
● Strong design team supporting customized profiles and special requirements
● High-quality materials and precision manufacturing process
● Wide range of machines for construction, automotive, and industrial applications
● Continuous R&D and technological innovation
Why Choose Us
● Complete testing and inspection before delivery
● Lifetime technical support and remote assistance
● Onsite installation and commissioning service available
● Competitive pricing with reliable performance
● Customized solutions for different production needs
● Professional after-sales service team
● Quick response to customer inquiries and requirements
Factory
Certificate
Our Partner
Contact Us
C Type Purlin Roll Forming Machine
Email:
jacky@huanuomachinery.com
Contact HUANUO for Shipping, delivery, and payments information.
Share to
Category
Tag list
Related Products
We look forward to working with you to jointly promote the development of China's cold bending equipment industry.
Phone/WhatsApp
Send E-mail
Leave Message
For more information, please leave your message below.
Online Message